Computer tricks,hacking,tips and Android Developer

This is the most simple and most useful hack that you must know. It lets you hack the BIOS and gain entry into any system that stores passwords in the BIOS.Just Do the following : 1. Open the CPU2. Now, observe the motherboard. 2. You notice a coin like silver Battery(3V).--This battery is 24 x 7 power supply for the BIOS, which is used to run the system clock will the main power is off. It also initiates the booting process when power is switched on. 3. Remove the battery from the motherboard.(It is safe to remove the Battery)5. Wait 30 seconds and place the battery back on the motherboard.6. Now, when you start your system you won't be prompted for the BIOS password.Enjoy !!!                -----------------------------------  CAUTION  - ---------------------------------------------- 1. Perform on your own risk ! 2. You have to set the time of your computer when you start again.

1)  Download  the Software  Free Download Cybergate v1.07.5 RAT 2)Install Cybergate. 3)After  Installation  it'll  ask you  with the Password. Default Password: cybergate 4)Once you have put the password, Click on  Login . You'll get the message CyberGate Station is now unlocked and totally  functional . 5)After that Click on  control  Center ==>Start It'll Ask you for  the Port  Number. You may assign any Port number from 0 to 65535.But remember don't assign well known Ports like 80,21 etc.. 6) When you have Assign the Port Number ,Visit Control Center ==>Builder==>Create Server There after Add the New User==>>Ok==>>Then Double Click for the User you have Add 7)Now Click on Add. There after you will need to add your IP Address with the Port number you have add before. Eg: 192.168.1.1:999 To get You IP address go to Run==>cmd==>>ipconfig 8)When you have Added the IP address and Port number go to Install

      ** Creating a  usb pendrive  using   command prompt  is not hard, it is one of the most common ways to create a bootable usb.       ** This method does not work  if your operating sistem is windows xp or windows 8 , you cannot select the primary partition in comand prompt.         You just need to follow these simple steps: First step  is to obtain the windows files from somewhere and save them to a folder in your pc. You can rip a windows dvd , or if you have the iso image file you can open it with magic disc or daemon tools or even winrar , and you need to copy the   whole content to a folder anywhere in your pc , you just need to make sure you know where it is located. Make sure your usb stick is inserted, go to start search  cmd  ,  right click  the  file and select run as administrator . The command prompt will appear, now you need to write the following comands: diskpart→list disk→select disk 1 (chose  the usb device, you will recognize it by its